Church Addition – Desloge, MO
Description: This project consisted of designing and building an add-on structure which provided many challenges. The design is a second floor area, which tied into the existing second floor. This second floor is supported by the rigid frame rafters and jack-beam system above because of the desire to have a clear, open youth common area below the second floor. In addition, the remainder of the building has a full basketball court with an overhead-walking track around it. The roof was completed with 6″ Tectum Composite Panel decking surfaced with composition shingles and the walls were completed with a brick veneer finish. This area of Missouri has some significant seismic issues, which had to be addressed as well.
(Completed 10/2006)
Recycling Facility – Catoosa, OK
Description: Whitney Manufacturing designed and engineered a set of buildings for a complete commercial recycling facility. This facility included an office structure, which has a decorative facia, standing seam roof panels and a brick veneer finish. It is attached to a 24,750 SQ FT warehouse. In addition, Whitney provided an 18,000 SQ FT Baler Building, a 6,000 SQ FT Maintenance Building with work bays and a 5,400 SQ FT 38′ high Turnings Building. Colors are ash gray walls with polar white roof and trim.
(Completed Fall 2008)
Church - Muskogee, OK
Description: Church Sanctuary with a sunken internal floor, adjacent class room addition, choir lofts and an entry commons area. This structure also supports an 1800 lb fiberglass steeple which extends 40′ above the roof line. The roof is a Standing Seam Trapezoidal Roof System in burnished slate. Walls consist of a brick veneer and EIFS finish over a reverse run panel.
(Completed 1/2005)
Casino Addition – Tulsa, OK
Description: This is an addition to an existing facility with a large clear open gaming area, adjacent raised floor and computer room. This building features a curved corner with a covered facia which forms the main entryway to the facility. In addition to this building, we added a two story office building, which has a curved Standing Seam BattenLok Roof System over steel trusses manufactured by Whitney Manufacturing.
(Completed 7/2005)
Tee Hangar – Okmulgee, OK
Description: This facility is a ten bay tee hangar with rolling doors. Doors were provided by Smith Hangar Doors and colors are kelly green and light stone.
Heavy Industrial Facility – Broken Arrow, OK
Description: This particular facility is a 62,500 sq. ft. heavy industrial fabrication facility. It consists of 2 buildings with 3 bays each. Each bay has two 20 ton overhead crane systems. For a total of 6 bays and twelve 20 ton overhead cranes. The 2 fabrication facilities are connected by an office, engineering and break room building. All buildings have a standing seam roof, a reveal trim package and its colors are ash gray with a crimson red reveal trim.